Five methods of interconnection between the hottes

2022-08-02
  • Detail

Five methods for interconnecting PC and MAC

the first method:

software or system used: windowsntserver

applicable environment: multiple Macs and multiple PCs

advantages: good stability, no impact with other computers during network transmission

disadvantages: a computer must be used as a server. If there is no special server, it is troublesome to use it with doswindows and WINDOWS9X, and the system wastes resources

scoring: ******

installation method: install windowsnt

installation network

install the Macintosh file service in the network

create and manage the MacFile volume in the file manager and share it with the PC on the network

note: the MacFile volume must be created on the hard disk partition of NTFS

second:

software or system used: FTP protocol for file management

applicable environment: any environment

advantages: good stability and fastest speed. There are many software available. There are many supported system platforms

disadvantages: inconvenient installation, different operation methods and habits

scoring: ******

installation method: the PC sets a fixed TCPIP address (e.g. 10.0.1.1 sub shield: 255.255.0)

the purpose of installing the f experimental machine is to install the FTP client on the tpserver (e.g. Microsof, which strives to be the pacesetter in the implementation of major national strategies, if it needs to move, it should handle tpws1.x, Serv-U, etc.)

mac's TCPIP is set to Ethernet and manually set the TCPIP address (e.g. 10.0.1.2 sub shield: 255.255.255.0) under various environmental conditions (such as netfinder, etc.) or install ftpserver on MAC and FTP client on PC.

precautions:

third type:

software or system used: ormac

applicable environment: macos7.5 advantages: simple operation and good stability. Minor defects affecting the local system: installation is troublesome. Each MAC must be scored with a separate serial number

: *****

installation method: the PC sets a fixed TCPIP address (such as 10.0.1.1 sub shield: 255.255.0) to set the workgroup, opens the file sharing Mac, sets the TCPIP to Ethernet, and manually sets the TCPIP address (such as 10.0.1.2 sub shield: 55.255.255.0)

installs NetBIOS in the Dave settings control version, Set the workgroup and the PC as the same. Set davefileshare in the control version.

notes:

type 4:

software or system used: pcmaclan6 X or 7 X

applicable environment: windows9 X advantages: simple installation and operation

disadvantages: change windows9 X system, the system is easy to crash

strongly deprecated

score: ****

installation method: PC installation pcmaclan settings file sharing AppleTalk in MAC is set to Ethernet notes: version 6.0 can be installed on Windows95, and systems above windows95osr2 need to be patched. After installing pcmaclan, be careful about system upgrade and change

fifth type:

software or system used: novellnetwareserver

applicable environment: multiple Macs and PCs

advantages: good stability, no impact with other computers during network transmission

disadvantages: it is troublesome to have a computer as a server, and the system wastes resources

scoring: ******

installation method: install novellnetwareserver

installation network

install Macintosh file services in the network

create and manage MacFile volumes in the file manager

Fang Da Tuan promised to share the volumes with PCs on the network

Copyright © 2011 JIN SHI