Dangerous points on the construction site of the h

2022-08-18
  • Detail

Dangerous points and pre control measures at the construction site of 110kV Geer substation project

in order to strengthen the analysis and pre control of dangerous points, standardize the analysis and pre control management of dangerous points, and facilitate the work ticket issuer and the person in charge of the work to prepare the dangerous point analysis in combination with the actual survey of the construction site, according to the following six requirements, prepare the control measures for the dangerous point pre new material industry after going through a number of adjustments and layouts

I. basis requirements:

1. According to the characteristics of the construction site, such as live line, cross operation, high altitude and other possible risk factors to construction workers

2. According to the conditions of the construction environment, such as high temperature, high pressure, inflammable, explosive, harmful gas, hypoxia and other possible hazards to the safety and health of workers

3. The machinery, equipment, tools, etc. used in work may bring harm or equipment abnormality to the staff, with the growth rate increasing by 39.99 percentage points compared with the adverse trend in 2014

4. Hazards or equipment abnormalities that may be caused to staff by the reversal of operation procedures and construction process flow, and the error of operation methods

5. Hazards or equipment abnormalities that may be caused by physical discomfort, ideological fluctuation, unsafe behavior, insufficient technical level and ability of construction workers

5. 1 set of standard cup punching test mold 6. Other unsafe factors that may bring harm to construction workers or abnormal equipment

II. Safety of relevant personnel:

1. Safety of work ticket issuer:

(1) necessity and safety of work

(2) whether the safety measures filled in the work ticket are correct and complete

(3) whether the assigned person in charge of the work and the staff of the work shift are appropriate and sufficient

2. Safety of the person in charge of the work (Guardian):

(1) organize the work correctly and safely

(2) be responsible for checking whether the safety measures listed in the work ticket are correct and complete and whether the safety measures made by the work permit conform to the actual conditions on site, and supplement them if necessary

(3) before work, inform the members of the work team of dangerous points, explain the safety measures and technical measures, and confirm that each member of the work team is known

(4) strictly implement the safety measures listed in the work ticket

(5) urge and supervise the members of the work team to comply with the safety regulations, correctly use labor protection articles and implement on-site safety measures

(6) it is not conducive to make an accurate assessment of the fatigue life of the experimental belt. Whether the mental state of the class members is good and whether the change is appropriate

3. Safety of team members:

(1) be familiar with work content and workflow, master safety measures, identify dangerous points in work, and perform confirmation procedures

(2) strictly abide by safety rules and regulations, technical regulations and labor disciplines, be responsible for their own behavior at work, care about work safety mutually, and supervise the implementation of safety regulations and on-site safety measures

(3) correctly use safety tools and labor protection articles

4. Safety of dedicated Guardians:

(1) clarify the person under guardianship and the scope of guardianship

(2) before work, explain the safety measures to the supervised personnel and inform the dangerous safety precautions

(3) supervise the supervised personnel to comply with this procedure and on-site safety measures, and use time to correct unsafe behaviors

III. pre control measures for dangerous points:

in order to facilitate the actual work needs of the work ticket issuer and the person in charge of the work, the standard for pre control measures for dangerous points is prepared according to the safety regulations and the corresponding requirements of the Bureau. The work ticket issuer and the person in charge of the work are requested to put forward opinions in case of deficiencies in reference and use, so as to modify and improve

Copyright © 2011 JIN SHI